How to setup DZMx Takeoff/Landing Event

Method 1 — Using aircraft speed (simplest, best for fixed-wing):

• Go to DZMx Connect > Settings > Triggered
• Set a speed just below the aircraft's take-off speed, and a speed just below the aircraft's landing speed

⚠️ Note: For helicopters, speed-based triggering is not ideal — it can cause false take-off/landing reports when hovering.

Method 2 — Using a switch input (recommended for helicopters):

• Wire a collective switch or a squat/weight-on-wheels switch (also called "wheels on ground") to one of the DZMx Plus General Purpose Inputs (GPIs)
• Configure it via the Controller: Settings > Inputs → select the Takeoff Switch function → set Input Designation to the wired input
• The Input Type field lets you specify whether it's a Collective Switch or a Squat Switch (weight on wheels)